Dyneema Custom Anchor Rode for Drum Winch
- Free Shipping
In Stock (updated 6/21/21):
1/2" 3-strand rope
9/16" 3-strand rope
5/8" 3-strand rope
5/16" G4 chain (under 100')
We are out (or have very limited inventory of):
1/4" G4 chain
3/8" G4 chain (under 20')
1/4" & 5/16" stainless steel chain
1/2" 8-plait rope
9/16" 8-plait rope (we have about 200')
5/8" 8-plait rope
Because of current supply shortages, we do not have an expected date for more rope or chain. Expect delays of 1-2 months.
If you have a drum winch and want to maximize the length of your anchor rode, a 3-part Dyneema anchor rode is the answer. Consisting of chain, nylon, and Dyneema rope, this combination gives you strength and length without bulk. These anchor rodes are custom made and take 2-3 weeks to process. If needed sooner, please call to arrange.
Below are the recommendations for the EZ-Anchor Puller models that are likely to use a Dyneema anchor rode. The numbers in the chart are the maximum feet of chain, nylon, and Dyneema that we recommend based on our tests. You can always order less but if you order more than recommended, it could go into the one inch of freeboard that EZ-Puller recommends on each drum winch. This means that once your anchor rode is loaded on your winch, you want at least one inch of space between the rode and the bottom of the plate where the drum is attached.
Watch our quick video on how to load your Dyneema anchor rode on your drum winch: