Hardware

BPI-32 Bulkhead Pipe Gland Reducer 32mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 28 and 32mm.These glands give a water and vapor-proof seal between bulkheads. They...

BPI-25 Bulkhead Pipe Gland Reducer 25mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 22.5 and 25mm.These glands give a water and vapor-proof seal between bulkheads...

BPI-20 Bulkhead Pipe Gland Reducer 20mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 18.5 and 20mm.These glands give a water and vapor-proof seal between bulkheads...

Traveller Eye (Pair) Size 0, 16mmFeatures:Size 0 16mm Traveller Eye PairRecirculating ball bearing dinghy traveller rangeComplementing Barton’s successful larger traveller range, the dinghy traveller system uses proven recirculating Delrin ball...

Series 40 High Load Exit Box for Single Rope or WirePlain bearing sheaves are ideal for halyards and other applications where high static loads are likely to be encounteredApplications:Ideal applications where lines (rope or wire) need to be led through...

Deck Organizer Size 1 - 3 SheaveDesigned for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminum construction with a grey or black anodized finish. Sheaves are from molded Acetal with...

Spinnaker Pole Slide Car (32mm)Features a heavy-duty stainless steel ring welded to an attachment plate, which is through-bolted to the slide. Generous ring opening to accept most pole ends.Plain bearing genoa cars, sliders, and spinnaker pole slides,...

Deck Plate with Fixing & Eye with Blanking Plug - M12 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric thread sizes – M8, M10, and M12, each...

Tubular Cleat - 6mmThese handy cleats have many uses where light loads are expected.Specifications:Weight: 5gDimensions: 55mm x 13mm x 14mmSize: 55mmFastenings: 4mm

Deck Eye - Stainless Steel - 14mmStainless steel deck eyes with generous eye capacity.Specifications:Stainless SteelDeck EyeSingle14mm Height x 14mm Width x 5mm Fastenings

7mm Dyneema Loop with High Load Eye - 22mm BoreThe Barton high-load eye with loop is available in three sizes and can be used in various applications on board, including barber hauler, preventers, mast base block tidies, emergency blocks, occasional...

Deck Plate with Fixing & Eye with Blanking Plug - M8 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric thread sizes – M8, M10, and M12, each...